top of page
Teltonika TRB246 Industrial IoT Gateway

Teltonika TRB246 Industrial IoT Gateway

$0.00Price

The TRB246 is an industrial 4G LTE gateway equipped with I/Os, RS232, RS485, and Ethernet interfaces for IoT solutions requiring versatility and reliable M2M communication support. This gateway has dual SIM functionality and supports multiple protocols, like DNP3, DLMS, and Modbus, vital for ensuring smooth data transmission. Encased in aluminium housing, this industrial-grade IoT gateway can tolerate extreme environmental conditions in manufacturing, agriculture, or construction.

Quantity
  • Specification

    Mobile module

    4G LTE up to 150 DL/50 UL Mbps; 3G up to 42 DL/5.76 UL Mbps; 2G up to 296 DL/236.8 UL Kbps

    Bridge

    Direct connection (bridge) between mobile ISP and device on LAN

    Passthrough

    Gateway assigns its mobile WAN IP address to another device on LAN

    Ethernet

    1 x ETH port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

    CPU

    Mediatek, 580 MHz, MIPS 24KEc

    RAM

    128 MB

    FLASH storage

    16 MB

    Input

    3x Configurable Digital Inputs, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high, 1x Analog input (0 - 30 V)

    Output

    3x Configurable Digital Outputs, Open collector output, max output 30 V, 300 mA

    Connector

    2-pin in 16-pin industrial terminal block

    Input voltage range

    9 – 30 VDC, reverse polarity protection, surge protection +/-1 kV 50 µs max

    Power consumption

    Idle: < 1.5 W, Max: < 3.5 W 

    Ethernet

    1 x RJ45 port, 10/100 Mbps

    I/O’s

    3 x Configurable digital I/O in 16-pin terminal block

    Status LEDs

    3 x connection status LEDs, 3 x connection strength LEDs, 1 x power LED, 1 x Eth port status LED

    SIM

    2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, double stacked SIM tray

    Power

    1 x 16-pin terminal block

    Antennas

    1 x SMA connector for LTE, 1 x SMA connector for GNSS

    RS232

    4-pin in 16-pin terminal block (TX, RX, RTS, CTS)

    RS485

    4-pin in 16-pin terminal block (D+, D-, R+, R-)

    Casing material

    Aluminium housing

    Mounting options

    DIN rail, wall mount, flat surface (all require additional kit)

    Operating temperature

    -40 °C to 75 °C

    Operating humidity

    10% to 90% non-condensing

    Ingress Protection Rating

    IP30


You might also like

bottom of page