top of page
Teltonika TRB160 4G LTE Cat 6 IoT Gateway

Teltonika TRB160 4G LTE Cat 6 IoT Gateway

$0.00Price

The TRB160 is an ultra-small, lightweight, and energy-efficient IoT gateway equipped with mission-critical LTE Cat 6, Gigabit Ethernet, and a virtual network interface via USB Type-C for simultaneous powering and network data provision. This IoT gateway can reach cellular speeds of up to 300 Mbps with carrier aggregation in a broad range of applications and supports a wide range of industrial-grade protocols for M2M communication.

Quantity
  • Specification

    Mobile module

    4G LTE Cat 6 up to 300 DL/ 50 UL Mbps; 3G up to 42 DL/ 5.76 UL Mbps

    Bridge

    Direct connection (bridge) between mobile ISP and device on LAN

    Passthrough

    Router assigns its mobile WAN IP address to another device on LAN

    ETH

    1 x ETH port, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

    CPU

    Qualcomm, 1.2 Ghz, ARM Cortex-A7

    RAM

    128 MB

    FLASH storage

    256 MB

    Input

    Up to 2 x Configurable digital Inputs (shared), 0 - 6 V detected as logic low, 8 - 30 V detected as logic high

    Output

    Up to 2 x Configurable digital Outputs (shared), Open collector output, max output 30 V, 300 mA

    Connector

    1 x 4-pin industrial DC power socket

    1 x USB Type-C

    Input voltage range

    4-pin: 9 - 30 VDC, overvoltage protection, reverse polarity protection, surge protection >35 VDC 10us max

    USB Type-C: 5 VDC

    PoE (passive)

    Possibility to power up through ETH port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC

    Power consumption

    Idle: < 0.25 W, Max: < 3.3 W

    Ethernet

    1 x RJ45 port, 10/100/1000 Mbps

    I/O’s

    2 x Configurable digital I/O on 4-pin power connector

    Status LEDs

    2 x connection type status LEDs, 3 x connection strength LEDs, 2 x ETH status LEDs, 1 x Power LED

    SIM

    1 x Internal SIM slot (Mini SIM – 2FF), 1.8 V/3 V, eSIM (Optional)

    Power

    1 x 4-pin power connector

    1 x USB Type-C

    Antennas

    2 x SMA for Mobile

    Casing material

    Anodized aluminum housing and panels

    Mounting options

    DIN rail, wall mount, flat surface (all require additional kit)

    Operating temperature

    -40 °C to 75 °C

    Operating humidity

    10% to 90% non-condensing

    Ingress Protection Rating

    IP30


You might also like

bottom of page