Teltonika RUT206 Industrial 4G Router
The RUT206 is a compact industrial router that supports RS232 and RS485 serial interfaces, along with both active and passive PoE inputs. Its rugged design, 2-pin power input, and expandable data storage via a microSD slot make it an ideal choice for a range of IoT and M2M applications. This 4G Cat 4 router comes with RutOS open-source software and supports key industrial protocols like Modbus, DNP3 and DLMS.
Specification
Wireless mode
802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA)
Wi-Fi security
WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF)
WAN
1 x WAN port 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
LAN
1 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
Ethernet
2 x RJ45 ports, 10/100 Mbps
Status LEDs
3 x Connection type status LEDs, 3 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED
SIM
2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, double stacked SIM tray
Power
1 x 2-pin power connector
Antennas
2 x SMA for Mobile, 1 x RP-SMA for Wi-Fi
RS232, RS485
1 x 6-pin terminal block
CPU
Mediatek, 580 MHz, MIPS 24KEc
RAM
128 MB, DDR2
FLASH storage
32 MB, NOR Flash
RS232
RS232 interface without flow control signals
RS485
Half duplex (2-wire) RS485 interface
Capacity
Up to 2 TB
Storage formats
FAT32, NTFS, ext2, ext3, ext4
PoE ports
1 x PoE In
PoE standards
Active PoE input 802.3af Class 0 (12.94 W) on LAN port
Connector
2-pin industrial DC power socket
Input voltage range
9 - 57 VDC, reverse polarity protection, surge protection >58V @10us min
PoE (passive)
Passive PoE over spare pairs 4,5 (+) / 7,8 (-). Possibility to power up through LAN port, passive PoE voltage: 16 - 57 VDC
Power consumption
Idle: < 2 W, Max: < 3.5 W
Casing material
Anodized aluminum housing and panels
Dimensions (W x H x D)
83 x 25 x 83 mm
Weight
132 g
Mounting options
DIN rail, wall mount, flat surface (all require additional kit)
Operating temperature
-40 °C to 75 °C
Operating humidity
10% to 90% non-condensing
Ingress Protection Rating
IP30