Teltonika RUT276 Compact Redcap 5G Router
Bring the core 5G benefits into your IoT projects with the RUT276 Redcap router. Enjoy higher throughput and lower latency than traditional 4G networks can offer, without the cost of a full 5G module. Serial RS232/RS485 interfaces enable seamless integration with industrial equipment, whereas dual SIM and automatic failover ensure always-on connection. Its industrial design and native protocol support makes it perfect for IIoT and M2M applications where continuous uptime is critical.
Specification
Mobile module
5G Sub-6Ghz SA 223 Mbps DL, 123 Mbps UL; 4G LTE Cat 4 – LTE 195 Mbps DL, 105 Mbps UL
Bridge
Direct connection (bridge) between mobile ISP and device on LAN
Passthrough
Router assigns its mobile WAN IP address to another device on LAN
WAN
1 x WAN port 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
LAN
1 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
Ethernet
2 x RJ45 ports, 10/100 Mbps
Status LEDs
2 x Connection type status LEDs, 3 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED
SIM
2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, double stacked SIM tray
Power
1 x 2-pin power connector
Antennas
2 x SMA for Mobile, 1 x RP-SMA for Wi-Fi
RS232, RS485
1 x 6-pin terminal block
CPU
Mediatek, 580 MHz, MIPS 24KEc
RAM
128 MB, DDR2
FLASH storage
32 MB, SPI Flash
RS232
RS232 interface without flow control signals
RS485
Half duplex (2-wire) RS485 interface
Serial functions
Console, Serial over IP, Modem, MODBUS gateway, NTRIP Client
Applications
Samba share, Storage Memory Expansion, DLNA
Capacity
Up to 2 TB
Storage formats
FAT32, NTFS, ext2, ext3, ext4
PoE OUT ports
1 x PoE In
PoE standards
Active PoE input 802.3af Class 0 (12.94 W) on LAN port
Connector
2-pin industrial DC power socket
Input voltage range
9 - 57 VDC, reverse polarity protection, surge protection >58V @10us min
Active PoE
Active PoE input 802.3af Class 0 (12.94 W) on LAN port.
PoE (passive)
Passive PoE over spare pairs 4,5 (+) / 7,8 (-). Possibility to power up through LAN port. Passive PoE voltage: 16 - 57 VDC.
Power consumption
Idle: < 2 W, Max: < 3.5 W
Casing material
Aluminum housing
Mounting options
DIN rail, wall mount, flat surface (all require additional kit)